Issue
- Oven displays CATA
- Cleaning reminder
Applies to
- Ovens with catalytic self-cleaning function
Resolution
Oven Displays CATA.
CATA is the Cleaning function on your AEG Oven. It cleans the Catalytic Lining, this is the lining on the sides, roof and back of the oven and it feels a little like sandpaper.
To Run the Catalytic Cleaning Function follow the steps below, there is also a video below which you may find useful.
Remove all the shelves and the side rails from the oven (these can be washed separately with a soft cloth and mild detergent.
Clean the oven floor with a mild detergent (this is because the Catalytic Enamel is not on the floor of the oven).
Clean the inner glass door with a soft cloth and mild detergent.
Turn the Oven on.
Press the symbol
until CATA appears in the display.
The Cleaning Function will now operate for one hour.
When the Cleaning function has been completed and the oven has cooled down the shelf supports and accessories can be placed back in the oven.
Please note the Catalytic Enamel should not be cleaned with detergent
If you have an AEG model with Catalytic Enamel Lining but which does not have the 
cleaning function, then the Catalytic Enamel Lining can be cleaned by turning the oven on at the Fan Oven Setting at 250° for one hour.
If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.
