Issue
- Cleaning instructions for SaphirMatt Hob with scratch-resistant surface
- What are the best methods to clean the SaphirMatt glass?
- Can I use a glass ceramic cleaner for the SaphirMatt hob?
- Which cleaner can I use for the hob with the matt surface?
- Can I use a glass ceramic scraper on the SaphirMatt hob?
- How to clean the black frame of the hob?
Applies to
- AEG hobs with SaphirMatt surface (scratch-resistant ceramic glass)
Resolution
Cleaning the glass surface of the hob
1. Different types of soilings:
Remove immediately: melted plastic, plastic foil, salt, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns.
Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, and shiny metallic discoloration.
2. Daily cleaning:
Clean the hob regularly with a wet soft cloth. You can use a standard cleaning detergent. Wipe the glass surface dry with a microfibre cloth.
3. Persistent marks and stains:
For persistent stains that cannot be removed by using the daily cleaning procedure, please follow these steps:
- Use a mildly abrasive cream cleaner (e.g. Cif, Viss, Vim, Jif or similar).
- Do not use standard cream cleaners – suitable for smooth glass ceramic – on SaphirMatt surface. It will not be sufficiently clean.
- Apply the cream cleaner and let it soak in for at least 5 minutes.
- Apply moderate pressure and gently scrub the surface in circular movements with a soft, non-scratch sponge for several minutes.
- Wipe the hob with a wet soft cloth to remove residues of the cleaning detergent.
- Wipe the glass surface dry with a microfibre cloth.
- If needed, repeat this procedure several times until all stains are vanished.
Non-scratch sponges usually have a blue color scouring pad and can be found in supermarkets.
NOTE: Strongly abrasive sponges, for example yellow-green or yellow-black sponges, are NOT suitable!
To remove burned-in residues, use a special hob scraper on the glass surface at a flat angle and move the blade on the surface.
NOTE: Always use a scraper recommended for hobs with a glass surface.
Cleaning the Frame
Depending on the model, the hob is equipped with a Matt Black frame on the side.
Only clean the metal frame with a damp cloth, dishwashing liquid, and warm water.
Do not use: cleaning milk, polishing agents, glass scrapers, or the rough side of a sponge.
Dirt, such as crumbs and grains of salt, can accumulate in the gap between the glass surface and the side frame - It is best to clean the gap with a wooden toothpick.
Do not use sharp-edged knives or metal objects for cleaning - this could damage the frame.
