Issue
- One or more burners do not ignite
- F appears in one or more of the displays of the gas hob
- F comes on
Applies to
Touchsure Electronic Gas Hobs with touch controls
Resolution
Here is the process to reset burners if an F appears in the display -
Power OFF using this button
Power ON using the same button
When hob display is illuminated, and F reappears touch the PAUSE button
WITHIN 3 SECONDS then touch the Hob2Hood button
When a 0 is seen in the display
The fault is reset, and you can now light the burners correctly
IMPORTANT: If there is still an issue please check that the Burner Cap (A) Burner Crown (B) are correctly fitted and the metal part of the Flame Safety Device (C) is clean (Use a moist soft cloth or sponge only)
If this does not resolve the issue, then call AEG Service 03445 611611
